This board holds a single 5mm common anode RGB LED, a WS2811 IC driver, and optional capacitors. It can be serially extended indefinitely while each L...
Add ESP8266 ESP-12 to a roomba! All resistors are 0805. Need to add a mini dc-dc converter from ebay and potential divider to drop the TX line to 3.3...
Board to enable the tiny internet connected board digistump OAK to control an RGB or RGBW strip.
Can be use with this arduino code:
https://github.c...
This is a simple interface between a 9 pin PlayStation controller and an Arduino. Supplies 3.3V to controller. Simple voltage dividers drop 5V ardui...
This is a MySensors based board that lets you control 4 different pins for analog LEDs. So you can control one RGBW, one RGB, or 4 single color LED st...
This can be used as a broken beam IR reflector. IR LEDs and phototransistors can be soldered in the LED holes.
populating R1 with a 1k resistor and Q...
VESC β Open Source ESC
Our goal is to provide the community of electric skateboard builders an open source, electronic speed controller with advance...
This implements a simple infrared transmitter (and optional receiver) for connecting to a raspberry pi. It consists of a transistor (2N2222 or similar...
