Dirty Terminals Sample Kit v1.0
Design by: ian
Samples of the most common crimp terminal connectors uncovered during our Huaqiangbei market expedition. Use along with Dirty Cables service to get cheap custom cables for your next project.
Contains the following:
- Ring terminals with attached wire (3.2mm, 4.2mm, 5.2mm, 6.2mm) and sample bolts & nuts (M3, M4, M5, M6)
- Spade terminals with attached wire (3.2mm, 4.2mm) and sample PCB-2 through-hole screw terminal block
- Mating blade terminals (male, female) with attached wire (2.8mm, 4.8mm, 6.3mm) and sample through-hole male connector
- Metal ring clasp to store the kit
Please refer to the table below for the exact kit contents.
| Series | Size | Part Number | Quantity |
|---|---|---|---|
| Ring terminal | 3.2mm/M3 | RING-3.2mm-CR | 2 |
| Ring terminal | 4.2mm/M4 | RING-4.2mm-CR | 2 |
| Ring terminal | 5.2mm/M5 | RING-5.2mm-CR | 2 |
| Ring terminal | 6.2mm/M6 | RING-6.2mm-CR | 2 |
| Spade terminal | 3.2mm/M3 | SPADE-3.2mm-CR | 2 |
| Spade terminal | 4.2mm/M4 | SPADE-4.2mm-CR | 2 |
| Blade terminal female | 2.8mm | BLADE-FEMALE-2.8mm-CR | 2 |
| Blade terminal male | 2.8mm | BLADE-MALE-2.8mm-CR | 2 |
| Blade terminal female | 4.8mm | BLADE-FEMALE-4.8mm-CR | 2 |
| Blade terminal male | 4.8mm | BLADE-MALE-4.8mm-CR | 2 |
| Blade terminal female | 6.3mm | BLADE-FEMALE-6.3mm-CR | 2 |
| Blade terminal male | 6.3mm | BLADE-MALE-6.3mm-CR | 2 |
| Bolt and nut | 3.2mm/M3 | M3 bolt, M3 nut | 2 |
| Bolt and nut | 4.2mm/M4 | M4 bolt, M4 nut | 2 |
| Bolt and nut | 5.2mm/M5 | M5 bolt, M5 nut | 2 |
| Bolt and nut | 6.2mm/M6 | M6 bolt, M6 nut | 2 |
| Screw terminal | M3 | PCB-2 M3 board mount clamp | 2 |
| Screw terminal | M4 | PCB-2 M4 board mount clamp | 2 |
| Blade term (PCB mount) | 2.8mm | BLADE-MALE-2.8mm-2P-PTH/0.5mm | 2 |
| Blade term (PCB mount) | 4.8mm | BLADE-MALE-4.8mm-2P-PTH/0.5mm | 2 |
| Blade term (PCB mount) | 6.3mm | BLADE-MALE-6.3mm-2P-PTH/0.8mm | 2 |
Currently unavailable.