enterprise.zip

Design by: bobricius

NEW OTHER models http://dirtypcbs.com/store/designer/browse/bobricius


SELECT SIZE 10cm x 10cm COLOR WHITE !!!!!!

NOTE:

Is there interest for easy solder version without programming MCU, static light, etc like desk lamp, usb powered ????
etc if anybody want this ship but have not arduino / attiny skills or soldering too small leds ... etc only 3528 simplified version ... ???

I am working on NEW version .

Feel free to ask bobricius gmail com !!!!!!

 

BOM (this is my crazy configuration, you can use 0805 or 0603 LEDS):

  • MAIN BOARD
    - 1x Attiny 85
    - 4x Spring battery holder BCL82PC (KEYSTONE)
    - 4x 47R 0603
    - 1x 100n 0603
    - 1x mode switch PTS810SJG250SMTRLF (C&K)
    - speaker not working now, do not solder
  • PLASMA COILS
    - 10x 3014 blue LED on coil
    (3014 LED is very hard to solder without hot air gun, you can use 0805)
    - 2x 0802 red LED on front - this is side LED
    - 2x 0802 yellow LED on tail - this is side LED
  • DEFLECTOR
    - 6x 0603 blue led
  • MIDDLE BOARD
    - 4x 0802 red LED, 2 on tail, 2 under plate - this is side LED
    (do not mix, use same color)
  • PLATE
    - 1x clear white LED 8mm as bridge
    - 6x 3014 white LED
    (3014 LED is very hard to solder without hot air gun, you can use 0805)
    - 1x 0805 pink LED, above NCC - 1701 text, soldered on side
    - 4x 0805 white LED, under bridge, soldered on side
    - 1x 4014 green LED as laser
  • Attiny85 compiled firmware (hex) and sources in FILES section on project page
  • FUSES: lfuse:w:0xc2:m hfuse:w:0xdf:m efuse:w:0xfe:m
    (8Mhz, BOD off)


Project page, firmware and details https://hackaday.io/project/162654-pcb-3d-startrek-enterprise 

Price Varies

Size
10.0 cm x 10.0 cm
PN
107-786